How to fix power saving mode problem in pc?

Question

Are you facing power saving mode problem in your computer? Yes ?

Here are few other reason of power saving mode problem:

1. Press power button for 15 seconds & restart.
2. Try using another monitor or other monitor data cable converter.
3. CMOS battery may be dead. Replace battery.
4. If your battery is new then remove it and put it back after few minute. (it resets the corrupt configuration if any)
5. Bad RAM or carbon/dust deposited on RAM pins. Try cleaning or swapping RAM OR try to boot PC with one RAM at a time..
6. If you have external video card, it may be dead or it requires cleaning of carbon deposited.
7. Power supply is faulty or internal power cables are having too much of dust and not able to make connections due to carbon/dust.
8. Monitor/VGA/HDMI cable (which connects display monitor and CPU) is faulty or have dust in pins/slots.
9. Video card, RAM, CPU is heating a lot. Add additional exhaust fan in the cabinet.
10. If you install 64 bit windows on 1GB RAM, you may get this error. 1GB RAM supports 32bit windows only
11. Check your display resolution is not set too high. May be your monitor is not able to handle high resolution OR (If by chance your computer turns on)
    1. Quickly.. Open Power Options by clicking the Start button, Control Panel, Power Options.
    2. Click “Change plan settings” under the plan that you want to change,
    3. On the Change settings for the plan page, select “Never” for “Put the computer to sleep” and click Save changes.

Watch video for more details:

Please comment if you know any other reason of power saving mode problem black screen.